Jeep Gladiator 2021 Page 373 Owner'S Manual Download

Page: 373 / 484

IN CASE OF EMERGENCY

371

2. Lift the spare tire with one hand to give

clearance to tilt the retainer at the end of

the cable and position it properly across the

wheel opening.

Reinstalling The Retainer

3. Attach the lug wrench to the extension

tubes with the curved angle facing away

from the vehicle. Insert the extension tubes

through the access hole between the lower

tailgate and the top of the fascia/bumper

and into the winch mechanism tube.

Reinstalling The Flat Or Spare Tire

4. Rotate the lug wrench handle clockwise

until the wheel is drawn into place against

the underside of the vehicle. Continue to

rotate until you feel the winch mechanism

slip, or click three or four times. It cannot be

overtightened. Push against the tire several

times to ensure it is firmly in place.

Rotating The Lug Wrench Handle

NOTE:

The winch mechanism is designed for use with

the extension tube only. Use of an air wrench or

other power tools is not recommended and can

damage the winch.

Summary of Contents for Gladiator 2021





































































































































































































































































































































































































































































































Search results

Summary of Contents for Gladiator 2021

Reviews:

Related manuals for Gladiator 2021

Brands by name

Popular brands

Jeep Gladiator 2021, Owner'S Manual

Search results

Summary of Contents for Gladiator 2021

Reviews:

Related manuals for Gladiator 2021

Brands by name

Popular brands