Jeep Gladiator 2021 Page 90 Owner'S Manual Download

Page: 90 / 484

GETTING TO KNOW YOUR VEHICLE

2. Using the provided #T50

Torx head driver

and ratchet, unscrew the two Torx head

fasteners on the inside of each top

mechanism.

Step Two

3. Utilizing two people, lift the soft top up and

away from the vehicle, careful to avoid the

vehicle’s sport bar and trim. Store the soft

top in a safe, clean, and dry location.

4. Remove the door frames. The rear door

frames must be removed before the front

door frames

page

97.

5. Using the provided #T50

Torx head driver

and ratchet, unscrew the six Torx head

fasteners on both rear corners and the back

of the cab, then remove the belt rail.

NOTE:

Folding down the rear seats is recommended to

provide easier access to the fasteners.

Step Five

1 — Rear Fasteners
2 — Corner Fasteners

Summary of Contents for Gladiator 2021





































































































































































































































































































































































































































































































Search results

Summary of Contents for Gladiator 2021

Reviews:

Related manuals for Gladiator 2021

Brands by name

Popular brands

Jeep Gladiator 2021, Owner'S Manual

Search results

Summary of Contents for Gladiator 2021

Reviews:

Related manuals for Gladiator 2021

Brands by name

Popular brands