Jeep Gladiator 2021 Owner'S Manual Download Page 117

Page: 117 / 484

GETTING TO KNOW YOUR INSTRUMENT PANEL

115

INSTRUMENT CLUSTER DISPLAY

Your vehicle will be equipped with an

instrument cluster display, which offers useful

information to the driver. With the ignition in the

OFF mode, opening/closing of a door will

activate the display for viewing, and display the

total miles (kilometers) in the odometer. Your

instrument cluster display is designed to display

important information about your vehicle’s

systems and features. The driver interactive

display, located in the instrument panel,

indicates how systems are operating and gives

you warnings when a system, or systems, needs

your attention. The steering wheel mounted

controls allow you to scroll through and enter

the main menus and submenus. You can

access the specific information you want to

make selections and adjustments.

NSTRUMENT

LUSTER

ISPLAY

OCATION

ONTROLS

The Instrument Cluster Display is located in the

center of the instrument cluster. The display

contains different areas of vehicle information.

Instrument Cluster Display Location



The top line where Reconfigurable Telltales,

Compass Direction, Outside Temperature,

Time, Range, Audio Info, MPG or Trip are

displayed. This also displays the Speedom

eter which is an option for the upper center

reconfigurable, but is not the default. Default

setting is Menu Title.



The main display area where the menus and

pop up messages are displayed.



The lower line where telltales, menu name

and menu page are displayed.

The system allows the driver to select

information by pushing the following buttons

mounted on the steering wheel:

Instrument Cluster Display Control Buttons

Up And Down Arrow Buttons:

Using the up or down arrow button allow

you to cycle through the Main Menu Items.
They allow you to change the Main Screen area

and Menu Title area.

1 — Left Arrow Button
2 — Up Arrow Button
3 — Right Arrow Button
4 — Down Arrow Button
5 — OK Button

Summary of Contents for Gladiator 2021





































































































































































































































































































































































































































































































Search results

Summary of Contents for Gladiator 2021

Reviews:

Jeep Gladiator 2021, Owner'S Manual, Page: 117 / 484

Search results

Summary of Contents for Gladiator 2021

Reviews: