Jeep Gladiator 2021 Owner'S Manual Download Page 13

Page: 13 / 484

Failure to use the driver and passenger seat belts provided is a major

cause of severe or fatal injury. In fact, the US government notes that the

universal use of existing seat belts could cut the highway death toll by

10,000 or more each year and could reduce disabling injuries by two

million annually. In a rollover crash, an unbelted person is significantly

more likely to die than a person wearing a seat belt. Always buckle up.

CAMPERS

This vehicle is NOT recommended for slide-in camper applications.

VEHICLE MODIFICATIONS/ALTERATIONS

SYMBOL GLOSSARY

Some car components have colored labels with symbols indicating

precautions to be observed when using this component. It is important to

follow all warnings when operating your vehicle. See below for the

definition of each symbol

page

126.

WARNING!

Any modifications or alterations to this vehicle could seriously affect its

roadworthiness and safety and may lead to a collision resulting in

serious injury or death.

Red Warning Lights

Air Bag Warning Light

Brake Warning Light

Battery Charge Warning Light

page

127

Door Open Warning Light

page

127

Electric Power Steering (EPS) Fault Warning

Light

page

127

Electronic Throttle Control (ETC) Warning Light

page

127

Engine Coolant Temperature Warning Light

page

128

Hood Open Warning Light

page

128

Summary of Contents for Gladiator 2021





































































































































































































































































































































































































































































































Search results

Summary of Contents for Gladiator 2021

Reviews:

Jeep Gladiator 2021, Owner'S Manual, Page: 13 / 484

Search results

Summary of Contents for Gladiator 2021

Reviews: