Jeep Gladiator 2021 Page 87 Owner'S Manual Download

Page: 87 / 484

GETTING TO KNOW YOUR VEHICLE

2. Using the side link, lift and push the soft top

toward the front of the vehicle, manually

guiding the top into the closed position.

Step Two

3. From inside the vehicle, pull the handle on

the header latch downward to engage the

hook into its receiver.

Step Three

4. Pull the handle back upward while

squeezing the hook, locking the latch into

place.

Step Four

5. Repeat steps three and four on the other

side.

Installing The Rear Window And Quarter

Panel Cover Assemblies

NOTE:

Both quarter panel cover assemblies and the

rear window must ALL be removed together, or

installed together.

Summary of Contents for Gladiator 2021





































































































































































































































































































































































































































































































Search results

Summary of Contents for Gladiator 2021

Reviews:

Related manuals for Gladiator 2021

Brands by name

Popular brands

Jeep Gladiator 2021, Owner'S Manual

Search results

Summary of Contents for Gladiator 2021

Reviews:

Related manuals for Gladiator 2021

Brands by name

Popular brands