Jeep Gladiator 2021, Owner'S Manual, Page: 103 / 484

GETTING TO KNOW YOUR VEHICLE 101
6. Lower the windshield gently until it contacts
the tie-down bumpers (if equipped).
Step Six
7. Secure the windshield by passing a cinch
strap through the tie-down bumper on
either side of the hood and on the
windshield frame. Tighten the strap to
secure the windshield in place.
Adaptive Cruise Control (ACC)/Forward
Collision Warning (FCW) Sensor Protective
Cover — If Equipped
Your vehicle may be equipped with a protective
cover that is to be used whenever the
windshield is folded down in order to protect the
ACC/FCW sensor. To install the cover, follow the
instructions below:
1. Secure the top part of the cover so that it
hinges to the header.
2. Swing the cover down and push on it so that
it covers the opening.
3. Check to make sure the cover is secured
properly.
Protective Cover Installed
NOTE:
Be sure to remove the cover before returning
the windshield to the normal position. Store the
cover in the cargo area.
Cleaning Instructions
During windshield down applications, dust/dirt
can accumulate in the cover and block the
camera lens. Use a microfiber cloth to clean the
camera lens, module, and inside cover, being
careful not to damage or scratch the module.
1 — Washer Nozzle
2 — Bumper
3 — Tie-Down
CAUTION!
Do Not Overtighten! Damage to the
windshield could result.
2