Jeep Gladiator 2021 Page 242 Owner'S Manual Download

Page: 242 / 484

240

MULTIMEDIA

RAG

& D

ROP

ENU

The Uconnect features and services in the main

menu bar are easily customized for your

preference. Simply follow these steps:

Uconnect 4 With 7-inch Display Drag & Drop

1. Press the Apps button to open the App

screen.

2. Press and hold, then drag the selected app

to replace an existing shortcut in the main

menu bar.

NOTE:

This feature is only available if the vehicle is in

PARK.

AFETY

ENERAL

NFORMATION

Safety Guidelines

Please read this manual carefully before using

the system. It contains instructions on how to

use the system in a safe and effective manner.

Do NOT attach any object to the touchscreen.

Doing so can result in damage to the

touchscreen.
Please read and follow these safety

precautions. Failure to do so may result in injury

or property damage.



Glance at the screen only when safe to do so.

If prolonged viewing of the screen is required,

park in a safe location and set the parking

brake.



Stop use immediately if a problem occurs.

Failure to do so may cause injury or damage

to the product. See an authorized dealer for

repair.



Ensure the volume level of the system is set

to a level that still allows you to hear outside

traffic and emergency vehicles.

Apps

Press the Apps button to access a list of the available Uconnect apps.

Climate

Press the Climate button to enter Climate Mode and access the climate

control functions

page

54.

Feature

Description

WARNING!

ALWAYS drive safely with your hands on the

steering wheel. You have full responsibility

and assume all risks related to the use of the

Uconnect features and applications in this

vehicle. Only use Uconnect when it is safe to

do so. Failure to do so may result in an acci

dent involving serious injury or death.

Summary of Contents for Gladiator 2021





































































































































































































































































































































































































































































































Search results

Summary of Contents for Gladiator 2021

Reviews:

Related manuals for Gladiator 2021

Brands by name

Popular brands

Jeep Gladiator 2021, Owner'S Manual

Search results

Summary of Contents for Gladiator 2021

Reviews:

Related manuals for Gladiator 2021

Brands by name

Popular brands