Jeep Gladiator 2021 Owner'S Manual Download Page 387

Page: 387 / 484

SERVICING AND MAINTENANCE

385

Mileage or time passed (whichever comes

first)

20,000

30,0

40,0

50,0

60,0

70,0

80,0

90,0

100,0

110,0

120,0

130,0

140,0

150,0

Or Years:

Or Kilometers:

32,000

48,0

64,0

80,0

96,0

112,0

128,0

144,0

160,0

176,0

192,0

208,0

224,0

240,0

Additional Inspections
Inspect the CV/Universal joints.

Inspect front suspension, rear

suspension, tie rod ends, and replace if

necessary.

Inspect the front and rear axle fluid.

Inspect the brake linings, replace as

necessary.

Adjust parking brake on vehicles

equipped with four wheel disc brakes.

Inspect transfer case fluid.

Additional Maintenance
Replace engine air cleaner filter.

Replace cabin air filter.

Replace spark plugs – 3.6L Engine.

Summary of Contents for Gladiator 2021





































































































































































































































































































































































































































































































Search results

Summary of Contents for Gladiator 2021

Reviews:

Jeep Gladiator 2021, Owner'S Manual, Page: 387 / 484

Search results

Summary of Contents for Gladiator 2021

Reviews: