JDS Uniphase 4100, User Manual, Page: 90 / 182

Chapter 5
Launching a reflectometry test and displaying results
Saving the trace(s) and generating a report
70
User Manual 770000102/08
Saving the trace(s) and generating a report
Once the results page is displayed, the trace(s) can be saved and a
report can be generated directly from the results screen.
The traces saving and report generation can have already been
performed automatically if the parameter
Auto Store
was defined on
Yes
in the Setup screen (see “Auto Store” on page 31 ) with the appropriate
Save Mode
(file only or file + txt or + pdf).
Saving results
and creating a
report from
results page
To save the trace and generate a report:
1
Press
Fast Report
key .
A menu displays under the trace.
2
In the menu, configure the file saving mode (and the report)
a
In the
Save Mode
parameter, select:
File Only
to save exclusively the trace in a sor file
Fig. 42
OptiPulses results in SmartLink mode
events detected on trace
with shortest pulse
events detected on
standard trace
Fig. 43
Fast report configuration
SmartOTDR™
OTDR Expert
MTS2100 4100 Module US rev08.book Page 70 Jeudi, 1. août 2013 1:43 13