Chapter 9
File management
File Setup menu
User Manual
770000102/08
129
When several different applications (corresponding to modules for
different measurements) are managed by the T-BERD/MTS, pressing
the
F
ILE
key several times in succession changes from one tab to
another to give access to the file configuration of the desired application
(e.g. FCOMP, LTS etc.).
File signature
The acquisition parameters of the trace contained in the selected file are
displayed at the top of the screen together with a small-scale represen-
tation of the trace (provided it was acquired on a MTS / T-BERD).
File
configuration
Dir
This parameter cannot be configured, and display the directory selected
by default into which the file(s) will be saved (the last directory selected).
To modify the directory, go to the
Explorer
page and select another
directory.
Fig. 85
Example of signature of an OTDR file (in the File
Menu)
Date of acquisition
of the signal
Pass / Fail indicator
Mini-trace
Comment
Acquisition time
Origin / End
Refraction Index
Resolution
Laser
Module used
for acquisition
Fiber Id
Cable Id
Fiber Number
Pulse width
NOTE
The OTDR file signature is available exclusively in the Explorer page.
Fig. 86
Example of signature with FCOMP file
Date of acquisition
Pass / Fail
indicator
Comment
Origin / End
Measurement
parameters
Module used
Fiber Id
Cable Id
Fiber Number
MTS2100 4100 Module US rev08.book Page 129 Jeudi, 1. août 2013 1:43 13