Chapter 8
FiberComplete Modules
Results screen
120
User Manual
770000102/08
The
Cable View
allows to display results of multiple fibers:
–
the average loss at each wavelength
–
the ORL A and ORL B at each wavelength
–
the distance is displayed on top of the screen
Fiber View
If, in the
Setup
page, the parameter
Table View
is set to
Fiber
, a screen
as the following one displays:
The Fiber View allows to display results of one fiber:
–
Loss B -> A and loss A -> B at each wavelength
–
the average loss at each wavelength
–
the ORL A and ORL B at each wavelength
–
the distance is displayed on top of the screen
Fault Finder
If, in the
Setup
page, the
Fault Finder
parameter is set to
Yes
, a Fault
analysis is automatically launched, if one value exceeds the thresholds
defined in the Setup menu.
As soon as the Fault Finder finishes its analysis, an easy to interpret
table displays. It indicates the attenuation values and/or reflectance of
the predominant defects that may have caused the IL / ORL values to fail.
1
Select
Table IL/ORL - Fault
to switch between the IL/ORL and Fault
Finder result
NOTE
In order to erase the results table, the Cable ID must be modified in
the
File Setup
Fig. 79
Result Fiber View
MTS2100 4100 Module US rev08.book Page 120 Jeudi, 1. août 2013 1:43 13