JDS Uniphase 4100, User Manual, Page: 89 / 182

Chapter 5
Launching a reflectometry test and displaying results
OptiPulses option
User Manual 770000102/08
69
4
Launch the acquisition pressing
S
TART
/S
TOP key
A beep is emitted at the end of the acquisition.
Results in
OptiPulses
mode
Once the acquisition is completed, a screen as the following one
displays:
With the OptiPulses option, the screen is as follows:
– Two traces for each wavelength measured: the trace with
shortest pulse and the standard one,
– One single results table per wavelength with results from both
traces merged.
Example: if OTDR acquisition if performed on two wavelengths, the
screen displays 4 traces and 2 results table.
Click on one event in the results table to automatically turns the trace on
which it has been detected active
In the
Summary page
, the Link Table is displayed in one single line
is displayed for the wavelength.
OptiPulses and SmartLink option
If the OptiPulses option is used with the SmartLink option, then the Smar-
tLink screen displays the graphical representation of the link with all the
events detected, whether they are detected on the trace with shortest
pulse or on standard trace.
Fig. 41
OTDR Traces with OptiPulses
event detected
on trace with
shortest pulse
events detected
on standard trace
MTS2100 4100 Module US rev08.book Page 69 Jeudi, 1. août 2013 1:43 13