Chapter 7
Power meter and Source options of the OTDR Modules
Connection to the power meter
92
User Manual
770000102/08
Connection to the power meter
The type of optical connector used for the power meter is the same as
the OTDR port.
With a module with 2 OTDR ports, select the port of connection
according to the wavelength available at each port (a label gives informa-
tion at the back of the OTDR module).
Configuring the Power meter
The power meter function is an option chosen at the time of order and
incorporated into the OTDR module in the factory.
To activate the function:
1
Press the
H
OME
button
2
Select the power meter icon in the section of the OTDR Module
The icon turns yellow
.
The effect of this action will to be to bring the power meter into use.
Fig. 57
Optical connector for the Powermeter or Source on
the OTDR Module
Connector
It is not possible to use simultaneously the Source function and
the Powermeter function, when both options are set onto the
OTDR module, as they use the same connector.
CAUTION
The Powermeter icons of the singlemode port and the one of the Mul-
timode port cannot be selected at the same time. When one is
selected, it automatically deselects the other one.
MTS2100 4100 Module US rev08.book Page 92 Jeudi, 1. août 2013 1:43 13