JDS Uniphase 4100, User Manual, Page: 142 / 182

Chapter 8
FiberComplete Modules
Saving results and generating a report
122 User Manual 770000102/08
Saving results and generating a report
Once the results page is displayed, the results can be saved and a report
can be generated directly from the results screen.
Saving and report can have been automatically generated if, in the file
configuration, the
Auto Store
parameter has been set to
Yes
(see
page 131 ) with the appropriate
Save Mode
.
Saving results
and creating a
report from
results page
To generate a report:
1
Press
Fast Report
soft key .
A menu displays under the trace.
2
In the menu, configure the file saving mode (and the report)
a
In the
Save Mode
parameter, select:
File Only
to save exclusively the results in a blts file
File + txt
to save the results in a blts file and to generate a txt file
of the results
File + pdf
to save the results in a blts file and to generate a report
in a pdf file
b
In the
Cable Id
parameter, enter/modify the name of the Cable
using the edition keypad.
c
Configure the parameter
Fiber Number
using the key .
NOTE
In bidirectional mode:
- The OTDR results trace for acquisition performed from Location A to
Location B is stored on the primary unit (Location A)
- The OTDR results trace for acquisition performed from Location B to
Location A is stored on the secondary unit (Location B).
Fig. 82
Fast report configuration
MTS2100 4100 Module US rev08.book Page 122 Jeudi, 1. août 2013 1:43 13