Operation
Safety Equipment
50
50
9811/5700-7
Fire Extinguisher (If fitted)
Location
The fire extinguisher is found under the seat and is held in
position by a stowage bracket. Keep the fire extinguisher
in this position until you need to use it.
Operation
T2-041_3
!M
WARNING
Do not use the fire extinguisher in a confined space.
Make sure that the area is well ventilated during and
after using the fire extinguisher.
4-2-3-1
!M
WARNING
After any use, the extinguisher should be replaced or
serviced.
4-2-3-2
Make sure that you understand how to use the fire
extinguisher. If necessary, refer to the instructions found
on the fire extinguisher.
Only try to extinguish a fire if the circumstances permit and
your safety is not endangered. If necessary, contact your
nearest fire department.
Using the fire extinguisher:
1
If the circumstances permit and your safety is not
endangered, move the machine to a safe place to
prevent the fire from spreading.
2
Remove extinguisher from its stowage bracket.
3
Remove safety pin
A
.
4
Aim directly at the fire from an upwind position, if
possible.
5
Squeeze trigger
B
to operate the extinguisher,
release the trigger to stop the flow.
S170520-3
Fig 42.
The fire extinguisher should be inspected daily. Refer to
Routine Maintenance, Fire Extinguisher (if fitted)
.
Summary of Contents for RTFL 926
