Routine Maintenance
Engine
139
139
9811/5700-7
Changing the Drive Belt
1
Get access to the drive belt. Refer to
Front End
Accessory Drive Belt, Introduction
.
2
Use a 16mm (5/8 in.) socket located on the hexagon
spigot nut
D
, carefully rotate the tensioner against the
spring force in direction
E
. Do not use excessive force
or the tensioner will be damaged.
3
Keep holding the tensioner against the spring force
and lift the belt off the tensioner pulley
F
.
4
Slowly release the spring force by rotating the
tensioner unit in the opposite direction.
5
Before fitting a new belt, check that the tensioner
roller and fan pulley rotate smoothly and that there is
no play in the bearings.
6
Fit the new drive belt around the pulleys.
K
Fig 102. (
T
138)
.
7
Use a 16mm (5/8 in.) socket located on the hexagon
spigot nut
D
, carefully rotate the tensioner against the
spring force in direction
E
. Do not use excessive force
or the tensioner will be damaged.
8
Keep holding the tensioner against the spring force
and lift the belt around the tensioner pulley F.
Summary of Contents for RTFL 926
