![background image](http://html1.mh-extra.com/html/jcb/rtfl-926/rtfl-926_operators-manual_3550898155.webp)
Routine Maintenance
Fuel System
145
145
9811/5700-7
Changing the Engine Fuel Filter Element
1
Get access to the Water Separator and Engine Fuel
Filter. Refer to
Water Separator and Engine Fuel
Filter, Introduction
.
2
Thoroughly clean the outside of the filter housing and
around the filter head.
3
Loosen the drain tap
B
and allow the fuel to drain into
a suitable container.
4
Remove the low pressure fuel lines
C
and
E
. Mark the
pipes prior to removal to ensure they are refitted in the
correct position.
5
Loosen the filter strap retaining screw
D
and lift the
filter clear.
6
Fit new filter element
A
, make sure that the filter is in
the correct position to enable connection of the fuel
lines. Torque tighten the filter strap retaining screw
D
to 24Nm (17.7lbf ft).
7
Reconnect the fuel lines
C
and
E
.
K
Fig 110. (
T
145)
.
8
Bleed the fuel system.
K
Bleeding the Fuel
System (
T
146)
.
Fig 110.
A
B
D
C
E
A
Summary of Contents for RTFL 926
