Operation
Drive Controls, Switches and Instruments
43
43
9811/5700-7
Air Conditioning and Heater Controls
Heater Controls
Hot air is directed to the windscreen by a pipe in the front
of the cab. It is directed to the cab through a shutter
A
on
the heater unit. A heater control switch
B
controls a two-
speed heater fan.
Air Control
Rotate vent
A
open to direct air into the cab. Rotate the
vent
A
closed to direct all the air to the windscreen.
Fig 31.
Air Conditioning Controls
To provide cool air in warm climates and during hot
seasons the air conditioning system delivers cool
dehumidified air into the cab.
Air conditioning reduces moisture from the air and can be
used to demist windows quickly in damp weather. Used in
conjunction with the heater, it also makes the interior of the
cab warm and dry.
Important:
Operate the air conditioning for at least 10
minutes per month.
1
Start the engine.
K
Starting the Engine (
T
53)
.
Note:
Before starting the engine make sure the air
conditioning is switched off (knob
A
, position
0
).
2
Turn knob
A
clockwise to position
1
to turn the air
conditioning on. Turn to position
2
to increase speed.
To obtain best results from the air conditioning system
ensure that all doors and windows are closed.
3
Turn knob
B
counter-clockwise to raise the
temperature. Turn the knob in the opposite direction
to reduce the temperature.
4
Position vents
C
as required to direct air.
Fig 32.
Summary of Contents for RTFL 926
