JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 76 -
14.5 The MODIFY function
Use the MODIFY function to modify and re-store fixture parameters of individual chase steps.
Press softkey MODIFY to activate this function. If the MODIFY function
is active, the corresponding field on the display is shown inverted.
Select the chase step to be modified with the encoder wheel STEP. When
the MODIFY function is active, the data of the chase steps are always output
via the DMX line.
Activate the fixtures of the chase step to be modified with the keys of the
Fixture Selection block.
Use the keys of the Fixture Selection block in combination with Preset keys
or the encoder wheels to modify the parameters of the chase step..
Press the Store key of the Combi section to store the process.
Press ESC to leave this menu.
14.6 The TRACE function
The TRACE function indicates, which chase step of an activated chase is currently active, i.e. is output. In
order to use the TRACE function, start one or several chases first. Press the Edit key in the Combi
section and then the chase key, the steps of which you wish to follow. Press the softkey TRACE to
activate the TRACE function. Now it is possible to trace the activity of the individual steps on the display.
Press ESC to leave this menu.
14.7 The R-LINK function
Cf. Chapters 6.1.7 and 6.1.8
14.8 The S-GROUP function
Cf. Chapters 11.14, 11.14.1 and 11.14.2
