JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 112 -
BLOCK
With this function, you can form blocks and copy, move or delete them.
SCROLL
If you turn the middle encoder wheel (FRAME -/+) you can see on the display that the time bar moves to
the right or to the left. Press and hold the softkey SCROLL, the time bar stops moving, the events and the
time units in the lower part of the display are changing.
---ALL
This softkey deletes all counts.
Note:
COUNTS is the number of individual events per block.
+ - EVT
If you wish to insert events into a block, select the desired time position with the middle encoder wheel
(FRAME -/+). On the display in the line „SEL“ appears for example M F1.
If a frame is occupied by more than one event, use the first encoder wheel (TRACK -/+) to select the
event you wish to insert into the block. Select the event and press the s - EVT. The event is no
longer displayed as bar in the column on the display, but as dotted line. If you wish to remove the event
from the block again, select the event and press the softkey + - EVT once more. The event is now
displayed as bar again.
+ - POS
A frame occupied by more than one event is called Position. If a complete Position shall be inserted in a
block, select your time position with the middle encoder wheel (FRAME -/+). On the display in the line
„SEL“ e.g. MF1 appears.
Press the s - POS to insert the Position into the block. On the display, these events are no longer
shown as bars, but as dotted lines.
If you wish to remove the Position from the block again, press the s - POS once more. The
complete Position is removed from the block and the events are displayed as bars again.
+ > POS
If you want to avoid a time-consuming search for the starting point of your block by means of the middle
encoder wheel, you can set block points.
Select the approximate starting point of your block with the left encoder wheel (- /+ FRAME) and press
the s>POS. You have now defined the starting point of your block (block point 1).
+ ----- >
Now set the ending point of your block. Select the ending point (block point 2) of your block with the left
encoder wheel (FRAME - / +) and press the softkey + ---- >. All events located between these two
points are displayed graphically as dotted lines.
< -- /-- >
With this key, you can toggle between block point 1 and block point 2.
>>>
With this key, you can toggle between page 1 and page 2 of the Block menu.
B-DEL
This softkey deletes all events in a block.
B-COPY
If you wish to copy a complete block, choose the desired block and select the position, where the block is
to be inserted, with the middle encoder wheel (FRAME - / +). Press the softkey B- COPY and the
complete block is copied to the selected position.
PLAY
The softkey PLAY starts and stops the timeline show.
Start: press the softkey PLAY once (key is displayed inverted).
Stop: press the softkey PLAY once more.
Important
: When a show is started with the softkey PLAY, it will always start from the beginning
(„00:00:00“).
