JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 60 -
The chase generator provides chase patterns for a variety of stage applications. If, for example, your
fixtures hang in alignment (e.g. on the backtruss of a stage), you can apply the chase patterns of Page 1
of the chase generator display.
If you fixtures are arranged symmetrically (e.g. to the left and right side of a stage), Page 2 of the the
chase generator will apply here.
If a double symmetrical stage setting is present (symmetrical arrangement on all four sides of a stage),
the chase pattern on Page 3 of the chase generator should be used here.
11.2.1 Basic programming with the chase generator
The chase generator enables fast programming of chases.
We will explain the mode of operation of the chase generator on the basis of the creation of a shutter
chase. It can be applied, of course, to all other features of your fixture.
Activating the chase generator
Press the Store key in the Combi section.
Then press the chase key, from which the chase shall be recalled later.
The Programme-Combi-Chase menu as displayed on the left
appears.
Now press the softkey CREATE to activate the chase
generator.
The chase generator has the following menu:
In the example on the left, the feature shutter is activated in
the Feature Selection.
(The display varies depending on the selected feature.)
Depending on the feature activated, different presets can be
recalled with the corresponding softkeys.
On the display, you will find a Short Manual on how to create
chases with the chase generator.
