JB-lighting Lichtanlagen GmbH Sallersteigweg 15 D-89134 Blaustein Telefon ++49(0)7304 9617-0
- 14 -
2.2 SELECT / CONFIG Setting up a fixture list with the help of the fixture library
Enter the main menu and select the menu item CONFIG by pressing the corresponding softkey. Then
activate the menu item SELECT.
The following display is shown:
Now select the fixtures to be added to the fixture list with the
keys in the Fixture-/PAR Selection block (keys 1-32). (During the
initialising process, only one fixture type at a time can be
selected. Repeat the procedure for each different fixture type.
As soon as the LEDs of the desired fixture storage places (keys
1-32) are lit, use the middle encoder wheel (SELECT) to select
the desired fixture type. On the display, the function fields of the
activated fixture places and the selected fixture type are shown
colour-inverted. Now press the softkey INIT and the selected
fixture will be assigned to the selected fixture storage places.
If you wish to assign additional fixture types to the fixture places
(keys 1-32), deactivate the active keys in the Fixture-/PAR-
Selection block first (LEDs must not be lit). Then select the
desired fixture places and repeat the initialising process as described above.
Caution:
If you copy a fixture type from the library, the PRESET name is copied along with it.
Press the ESC key to leave this menu.
2.2.1 Deleting individual fixtures from the fixture list
If you wish to delete one or several fixtures from the fixture list, activate the fixtures by pressing the
corresponding keys in the Fixture-/PAR Selection block. Press the softkey OPEN in the
CONFIG/SELECT menu to delete the fixtures.
2.2.2 Deleting the entire fixture list
If you wish to delete the entire fixture list, enter CONFIG/SELECT menu and press the softkey CLEAR.
Confirm the process by pressing the softkey YES.
2.3 PATCH / Assigning start adresses to fixtures
When the fixture list is completed, you must assign start adresses to the fixtures. This assignment is
carried out in the CONFIG/PATCH menu.
Enter the main menu and activate the CONFIG menu by pressing the corresponding the softkey.
Then select the menu item PATCH.
The following will be shown on the display:
The fixture list you have entered before is shown. Each fixture is displayed by its short name and the
number of DMX channels of the fixture is specified in brackets below. This menu provides two pages for
the fixture list. You can toggle between page 1 (designated SCAN 1, fixtures 1 to 16) and page 2
(designated SCAN 2, fixtures 17-32) by pressing the corresponding keys. The activated softkey is
displayed inverted.
