63
Brightness control
Self-diagnostic tests
Paper feeding
d.
Display/indicator unit
Power-on indicator
Visual alarm on important message receiving
Out-of-paper alarm
Receiving indicator
(2) Power unit
Input voltage
12 to 24 VDC(Tol30%,-10%)
Power consumption
(Standby) at 12 VDC: Approx. 4 W
(Operating) at 12 VDC: Approx. 6 W (max.)
(Standby) at 24 VDC: Approx. 5 W
(Operating) at 24 VDC: Approx. 7 W (max.)
9.1.2
Mechanical specifications
(1) Minimum and maximum temperature range
Operating: -15 to +55
°
C
Storage: -25 to +75
°
C
(2) Relative humidity
Up to 95% at 40
°
C
(3) Dimensions
246 mm wide
×
170 mm high
×
131.5 mm deep
(with mounting base)
(4) Installation
Wall-mounting, desk-mounting, or ceiling-mounting
(5) Mass
2.0 kg (with mounting base)
Summary of Contents for NCR-330
