35
5.3.2
Selecting a receiving station
After the printer has printed:
(a) If you wish to select a station, first press the
ENT
(enter) switch .
This allows you to select a coast station.
The display unit displays 26 coast stations (A to Z). Select the desired one from among those
displayed.
NOTE
: For a list of stations and their broadcasting schedules, see Appendix 2, NAVTEX
Broadcast Stations and Schedules, at the end of this manual.
→
Selecting the receiving mode
Press the
ENT
switch . The lamp at the bottom right of the display unit will turns
on.
→
Receiving mode not selected
Press the
CLR
(clear) switch . The lamp at the bottom right of the display unit will
turns off.
→
Changing the station
Press the
∆
switch . The display will be sorted in ascending order.
→
Changing the station
Press the
∇
switch. The display will be sorted in descending order.
SET COAST STATION ?
Summary of Contents for NCR-330
