40
5.3.4
Selecting receiver status
After the printer has responded with:
(a) To select receiver status, first press the
ENT
switch .
This allows you to select receiver status.
The printer prints out receiver status selection items. Select one from among those printed
out.
(a-1) Alarm buzzer on/off
The alarm buzzer can be set to automatically give an alarm whenever navigational alerts
A or L or meteorological alerts B is received.
NOTE
: Regardless of the above selection, the alarm will always sound when search-
and-rescue information D is received.
→
Activating the alarm
Press the
ENT
switch. The printer will respond by printing “ON”.
→
Deactivating the alarm
Press the
CLR
switch. The printer will respond by printing “OFF”.
SET STATE ?
Summary of Contents for NCR-330
