![background image](http://html1.mh-extra.com/html/japan-radio-co/ncr-330/ncr-330_instruction-manual_3352303049.webp)
38
→
Ending selection
Press the
MENU
switch.
NOTE
: The 22 types of messages that can be selected/de-selected are as follows:
C: Iceberg report
E: Weather forecasts
F: Pilot information
G: Decca information
H: Loran information
I: Omega information
J: Satellite navigational information
K: Electronic navigation equipment information
M to U: Other information
V, W, X, and Y: Special services
Z: No information
After selection of the message type, the printer will print out a list of non-selected
messages followed by:
Receiver status can now be selected.
(b) If you do not wish to select a message type, press the
CLR
switch.
The printer will respond with:
and ask you to select receiver status.
SET STATE ?
**Disabled Message Type :
--C----H------------------
SET STATE ?
Summary of Contents for NCR-330
