
iv
OPERATING PRECAUTIONS
CAUTION
Do not place the receiver unit on an unstable surface. If placed on an unstable
table or an uneven surface, it could fall and result in personal injury and/or
damage or malfunction of the unit.
Secure the unit sturdily using the supplied screws.
Do not expose to water or moisture. Placement on exposed decks or in humid
places may cause electrical shock or product malfunction.
Do not open or remove the cover of the unit. Touching the parts inside could
result in electrical shock. If it is absolutely necessary to check the interior of
the unit for maintenance purposes, turn off the power switch on the power
distribution panel supplying its power.
Avoid exposure to direct sunlight, heat, moisture, and dust. Failure to do so
may cause fire, malfunction, and/or deterioration of print-out quality.
Always use the JRC-recommended printer paper. The use of any other paper
may cause printer trouble and/or deterioration of print-out quality.
When cleaning, do not use benzene, alcohol, thinner, or other volatile solvents.
These solvents may damage or cause deterioration to the coated surface.
Wipe the surface lightly with a soft cloth.
Summary of Contents for NCR-330
