Japan Radio Co. JLR-7900, Instruction Manual

Page: 73 / 184

4-31
4.5.5 Deleting Routes

Routes registered between 1 and 20 can be deleted.

The waypoint on the route to be deleted can also be deleted at the same time.

If the waypoint is also detected, the waypoint used on the different route is not deleted.

Active routes cannot be deleted.
1. Press the key to display the main menu.
2. Press the key to select "WPT/ROUTE" and "DELETE ROUTE," and press the key.
An overview of the route deletion submenu is as follows.
(1) ROUTE LIST:
Specify the route to be deleted on the route list.
(2) FROM TO: Enter the start and end points and specify the range to be deleted.
(3) ALL DELEATE:
Delete all routes between 1 and 20.
3. Press the key to select the route deletion method, and press the key.
(1) When "ROUTE LIST" is selected
The route list will be displayed. Move the cursor to specify the route you wish to delete, and press
the key.
(2) When "FROM TO" is selected
Enter the start ("FROM") and end ("TO") points, select "DELETE ROUTE," and press the
key.
(3) When "ALL DELETE" is selected
All routes in the route list are deleted.
4. Press the key to select whether the waypoint is to be deleted, and press the key.
An overview of waypoint deletion submenu is as follows.
(1) ROUTE + WPT: The route as well as the waypoint used on the route are deleted. However,
the waypoint used on the different route is not deleted.
(2) ROUTE: Only the route is deleted.
Procedure