4-15
4.3.3 Centering the Own Ship on the Screen
The position of the own ship can be moved to the center of screen.
1. Press
the
key.
Own ship will be displayed at the center of the screen.
When own ship reaches the edge of the screen, it automatically returns to the center of the
screen.
While the temporary route is created, the own ship will not return to the center of the screen
even if the
key is pressed.
4.3.4 Registering the corsor position
The cursor position can be registered to the waypoint list.
1. Press the key on the plot screen to display the cursor
2. Press the key at the position you wish to register.
4.3.5 Registering
the
Own ship's position
The own ship's position can be registered to the waypoint list.
1. Press the key.
4.3.6 Track
Display
The own ship's track can be displayed.
A maximum of 2,000 points of track can be stored. Once this number is exceeded, older track points
will be automatically deleted.
Procedure
Procedure
Procedure
Own ship
Track
Supplement
Summary of Contents for JLR-7900
