4-10
4.2.2 Turning off the power
If the
key and the
key are pressed and held down simultaneously, the power will be
turned off and the screen display will turn off.
4.2.3 Adjusting the Backlight by using the kry
The brightness of display and operation panel backlight can be set to one of four levels (bright, medium,
dark, off).
Whenever
is pressed, the level changes in the order of bright – medium – dark – off –dark –
medium – bright.
4.2.4 Adjusting
contrast
Contrast can be adjusted over 13 levels.
Whenever
is pressed, the contrast is reduced (or increased) from the current setting and after
the contrast reaches the lowest (or highest) level, the contrast increases (reduces) gradually.
The power may be turned on due to the release timing of your finger.
In this case, first release the and then release the .
Supplement
The brightness levels other than “off” can be set. See “4.9.2 Adjusting the back light"".
An external dimmer unit can also be used for adjusting brightness. See “4.15.3 Selecting a
dimmer unit”.
Supplement
Summary of Contents for JLR-7900
