Japan Radio Co. JLR-7900, Instruction Manual

Page: 59 / 184

4-17
4.3.7.1 Changing Waypoint Symbol

Set the default value of the symbol to be displayed for the waypoint.

The symbol can also be changed individually from the waypoint list.

In order to change symbols, you must switch the unit to non-IMO mode.
1. Press the key to display the main menu (standard mode).
2. Use the key to select "PLOT" and "WAYPOINT MARK" and press the key.
3. Use the key to select the symbol and press the key.
4.3.7.2 Changing Event/Mark Symbol

Set the default value of the symbol to be displayed for the event/mark.

The symbol can also be changed individually from the waypoint list.

In order to change symbols, you must switch the unit to non-IMO mode.
1. Press the key to display the main menu (standard mode).
2. Use the key to select "PLOT" and "EVENT MARK" and press the key.
3. Use the key to select the symbol and press the key.
To switch to non-IMO mode
1. Display a PLOT screen
2. Press the and for 8 second. "NON IMO" pop-up appears for 3 second.
To switch to IMO mode again
1. Display a PLOT screen
2. Press the and for 8 second. "IMO" pop-up appears for 3 second.
4.3.7.3 Deleting Event/Mark Symbols
The registered events/marks must be deleted from the waypoint list to delete them.
To delete events/marks from the waypoint list, refer to "4.4.5 Deleting waypoints."
Procedure
Procedure
Supplement