4-59
4.13.8 Setting Beacon
Beacon setting can be performed.
An overview of submenus on the beacon setting screen is as follows.
(1) STATION SELECT: Set the beacon station selection method.
AUTO:
The best beacon station is selected automatically from the GPS position.
MANUAL:
You can set the frequency and bit rate manually.
(2) FREQUENCY:
Set the frequency when station selection is set to manual.
(3) BIT RATE:
Set the bit rate when station selection is set to manual.
1. Refer to "4.15.1 Change to a maintenance mode" and display the maintenance menu.
2. Press
the
key to select "SENSOR" and "BEACON."
(1) Setting beacon station
3. Press
the
key to select "STATION SELECT."
4. Press
the
key to select the method, and press the
key.
When selecting a station manually, set up the frequency and the bit rate.
(2) Setting frequency
3. Press
the
key to select "FREQUENCY."
4. Press
the
key to set the frequency, and press the
key.
(3) Setting bit rate
3. Press
the
key to select "BIT RATE."
4. Press
the
key to select the bit rate, and press the
key.
Procedure
Manual
Summary of Contents for JLR-7900
