13
Collegare l‘antenna verticale 2,4
GHz, come illustrato nella fi gura
adiacente. Non si può, tuttavia,
montare l‘antenna su oggetti me-
tallici, il raggio d’azione si ridur-
rebbe notevolmente.
IT - Controlli
Vista laterale destra
1. Scatola di programmazione
2. Antenna 2.4 GHz
3. Volante
4. Leva del gas
5. Vano Batterie
Settore di programmazione
6. Direzione Reverse
7. Power LED
8. Direzione -Trim
9. Interruttore on /off
A. Gas Reverse
B. Power Check
C. Pulsante collegamento Binde
D. Gas Trim
E. Dual-Rate
Con una sincronia di pulsanti, interruttori e display LCD, la tras-
mettente CCX 2.4 GHz Car, può essere programmata rapida-
mente e con facilità. Tutti i canali possono essere trimmati, inolt-
re è possibile invertire la direzione. In più, vi sono a disposizione
le funzioni, Dual-Rate, EXPO e ABS. Una LED indica lo stato di
carica della alimentazione del trasmittente.
Thanks to the logical and well thought out lay-out of the Program-
ming Panel and the positioning of the switches and LEDs the
CCX 2.4 Car transmitter can be quickly and simply programmed.
Both channels can be trimmed and the direction changed. Fur-
thermore the transmitter is equipped with a Dual Rate system
and a red LED indicates the state of the battery charge.
1
2
3
4
5
6
7
8
9
A
B
C
D
E
Vista laterale sinistra
F. Presa di carica
G. Collegamento per cavo Simulatore
Se si carica attraverso una presa, si prega di
aprire il coperchio della batteria. Viene usato
per il raffreddamento.
G F
2,4 GHz
Antenna
Ricevente
2,4 GHz
Antenna
Receiver
GB - Controls
Side View
1. Programming Box
2. 2,4 GHz Antenna
3. Steering Wheel
4. Throttle Lever
5. Battery Hatch
Programming Panel
6. Steering Reverse
7. Power LED
8. Steering Trim
9. ON/OFF Switch
A. Throttle Reverse
B. Power Check
C. Binding Button
D. Dual-Rate
E. Throttle Trim
Rear Side
F. Charge Socket
G. Simulator Cable Socket
If charging the batteries via the charging socket,
the battery hatch cover should be removed to
ensure suffi cient cooling.
Mount the 2.4 GHz antenna verti-
cally as shown in the diagram.
Do not allow any metal object to
come into contact with the anten-
na or to shield it as this will reduce
the range.