File Version: 3.2
32
/
62
JAKA C Series Hardware User Manual
1.
C 5, C 7 flange size drawing
2.
C 12 flange size drawing
Note:
1. When you install the robot at different angles, the installation angle must be updated in the software. See
JAKA Software Manual for detailed operation.
2. It is normal that the installation holes of the robot are rusted or have traces of use. The JAKA robot needs to
accept a series of performance tests before leaving the factory. Therefore, there will be traces of use in the
installation hole, which is not a quality problem and does not affect its use.
3. If the robot is not fixed on the pedestal firmly, the mechanical structure of the robot may be unstable, and it
may tip over.
4. When ceiling mounting or wall mounting is adopted, the rigidity and stability of the installation plane should
be ensured, for it is very dangerous to install the robot on the wall or ceiling with insufficient intensity and rigidity,
which may cause the robot to vibrate or fall, leading to severe injuries or serious damage to the robot.
