JAI PULNiX TM-4100GE, Operation Manual

Page: 38 / 71

Page 28
GigE Series Camera Serial Commands
TM-4100GE Software
TABLE 5. 18 Bytes Status Report
Byte 1, 2 MGA Channel A Gain Control (H’042 - H’1E8)
Byte 3, 4 VRA Channel A Offset Voltage (H’000 - H’1FF)
Byte 5, 6 MGB Channel B Gain Control (H’042 - H’1E8)
Byte 7, 8 VRB Channel B Offset Voltage (H’000 - H’1FF)
Byte 9 Function Flag 0
Bit 7 output pixel order 1
“00”=<-- “10”=<--
“01”=<--
Bit 6 output pixel order 0
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
“00” = Scan area A
“01”=Scan area B
“10”=Scan area C
“11”=Scan area D
Byte 10 Function Flag 1
Bit 7 ShutterMode2 “000”=Manual Shutter
“001”=Async Shutter
“011”=Direct Shutter
Bit 6 ShutterMode1
Bit 5 ShutterMode0
Bit 4 Output Data Depth 0=8 bit 0=8bit; 1=10bit
Bit 3 ShutterSpeed3
“0000” - “1001” Shutter Speed 0 - 9
Bit 2 ShutterSpeed2
Bit 1 ShutterSpeed1
Bit 0 ShutterSpeed0
Byte 11 Function Flag 2
Bit 7 LUTSIGN 0=Positive LUT; 1=Negative LUT
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2 LUTTABLE2 “000”=Linear LUT
“001”=Gamma.45 LUT
“010”=Two Knee Table
Bit 1 LUTTABLE1
Bit 0 LUTTABLE0