CV-L108CL
22
PEG
Programmable
Exposure
-
Green
PEG=[Param.]<CR><LF
>
PEG?<CR><LF>
2 to 577536, in 25ns
increments
Only valid for TR=1
PEB
Programmable
Exposure
-
Blue
PEB=[Param.]<CR><LF
>
PEB?<CR><LF>
2 to 577536, in 25ns
increments
Only valid for TR=1
AH
One-push AWB
shutter
AH=[Param.]<CR><LF>
0=Activate one-push AWB
shutter
Only valid for TR=1
AHRS
Get status
after one-push
AWB shutter
AHRS?<CR><LF>
<One of following values will
be replied from the camera>
0=Succeeded.
1=AWB has not been finished
yet.
2=Error1. Green image was
too bright.
3=Error2. Green image was
too dark.
4=Error3. Timeout-error
occurred.
C - Trigger mode
TR Trigger Mode
TR=[Param.]<CR><LF>
TR?<CR><LF>
0=No-Shutter mode
1=Shutter-Select mode
2=Pulse Width Control
mode
TI
Trigger Input
TI=[Param.]<CR><LF>
TI?<CR><LF>
0=Camera-Link
1=Hirose12pin
TP Trigger
Polarity
TP=[Param.]<CR><LF>
TP?<CR><LF>
0=Active-Low
1=Active-High
D - Image format
BI
Binning
BI=[Param.]<CR><LF>
BI?<CR><LF>
0=Binning Off, 1=Binning On
BA Bit allocation
BA=[Param.]<CR><LF>
BA?<CR><LF>
0=24bit, 1=30bit
TS Test Pattern
TS=[Param.]<CR><LF>
TS?<CR><LF>
0=Off
1=Color Bar
2=Gray Pattern 1
3=Gray Pattern 2
4=White
Off at power up
E - Gain, white balance and signal settings
GA
Gain Level -
Master
GA=[Param.]<CR><LF>
GA?<CR><LF>
-132 to 429
0=0dB
GAR
Gain Level -
Red
GAR=[Param.]<CR><LF>
GAR?<CR><LF>
-231 to 231
GAB
Gain Level -
Blue
GAB=[Param.]<CR><LF>
GAB?<CR><LF>
-231 to 231
BL
Black Level -
Master
BL=[Param.]<CR><LF>
BL?<CR><LF>
0 to 127
BLR
Black Level -
Red
BLR=[Param.]<CR><LF>
BLR?<CR><LF>
-64 to 63