CV-L108CL
45
12
Appendix
12.1 Precautions
Personnel not trained in dealing with similar electronic devices should not service this camera.
The camera contains components sensitive to electrostatic discharge. The handling of these devices
should follow the requirements of electrostatic sensitive components.
Do not attempt to disassemble this camera.
Do not expose this camera to rain or moisture.
Do not face this camera towards the sun, extreme bright light or light reflecting objects.
When this camera is not in use, put the supplied protective cap on the lens mount.
Handle this camera with the maximum care.
Operate this camera only from the type of power source indicated on the camera.
Remove power from the camera when changing switch settings.
12.2 Typical Sensor Characteristics
The image sensors used in the CV-L108CL have been chosen for their superior performance. There
may, however, always be artifacts visible in the scanned image originating from pixel imperfections
in the camera. The Pixel Gain and Pixel Black correction functions will allow the user to compensate
for such artifacts, producing an essentially “flat” image.
12.3. Caution when mounting a lens on the camera
When mounting a lens on the camera dust particles in the air may settle on the surface of the lens
or the image sensor of the camera. It is therefore important to keep the protective caps on the lens
and on the camera until the lens is mounted. Point the lens mount of the camera downward to
prevent dust particles from landing on the optical surfaces of the camera. This work should be done
in a dust free environment. Do not touch any of the optical surfaces of the camera or the lens.
12.4. Exportation
When exporting this product, please follow the export regulation of your own country.
12.5 References
1. This manual for CV-L108CL can be downloaded from www.jai.com
2. Datasheet for CV-L108CL can be downloaded from www.jai.com
3. The camera control software can be downloaded from www.jai.com