CV-L108CL
42
11
Specifications
11.1 Typical data
Scanning system
Line Scan
Pixel clock
40.00 MHz
Line Rate
( Standard )
Line rate: 14.10 μs (No-Shutter mode with Internal trigger)
Line Frequency:
70.922 kHz
(total number of pixels per line: 564
Programmable line
rate (internal trigger)
Adjustable range: 14.10 μs(1L) to 14.438 ms(1024L)
Increments : 25 ns
Image Sensor
Effective pixels : 512 pixels
Pixel Size : 14.0μm × 14.0 μm
Effective image length : 7.168 mm
Sensitivity of sensor Radiometric: 27nJ / cm
2
Sensitivity on sensor
162 lux (4000K)
(Line rate:600μs, Gain=0dB,Shutter =OFF, 100% video)
S/N
58 dB (Green channel, Gain=-3dB
）
Video output
Digital 8-Bit x 3 or 10-Bit x 3 (Camera link)
Gain range
Master(Green): -3dB to +12dB
White balance
Adjustable range : 2800K to 9000K
Standard color temperature : 4000K
Flat field correction
Corrects for pixel response non-uniformity and pixel dark signal
non-uniformity (FPN) - (individual pixel, two-point correction)
Shading correction
Corrects for shading caused by illumination or lens vignetting. Can
also be configured to compensate for chromatic shading.
Knee control
Slope and Knee point compensation
Electronic shutter
Available for Shutter-Select and Pulse Width Control (PWC) modes
Adjustable range : 50ns(2 clk) to 14.483ms
(Note 1)
Adjustment increments : 25ns(1 clk)
Binning
Horizontal binning
Global Black level Master
Reference : 32(8) LSB
(Note 2)
Adjustable range :-64 to 64(16) LSB
(Note 2)
Test pattern generator Color bar, gray 1, 2 and white, 890 LSB
Synchronization
By external trigger pulse, or internal clock
Operation mode
No-Shutter, Shutter-Select, Pulse Width Control (PWC)
Trigger input
Hirose12Pin : 4.0
±
2.0Vp-p
TTL or
Camera link : LVDS (CC1)
Possible to change Negative Logic or Positive Logic
Minimum trigger width : more than 500ns(SHUTTER-SELECT) I,
50μs(PWC)
