JADAK flexpoint™ HS-‐‑1M User’s Manual
Page 35
Chapter 6 - Imaging
The HS-1M can be used to capture images in addition to decoding barcodes, as it behaves
like a digital camera.
This can be very helpful in applications such as patient identity verification, signature capture,
or any other situation where you need to take an image. This chapter describes some of the
functions that are related to image capturing.
Illumination Brightness
Use the command
LEDSPWR
to set the Illumination (LEDs Power) between ‘Off’ and 100% with
a value between 0 (=Off) and 3 (=100%).
Note that this setting also is in place when scanning barcodes.
All illumination brightness menu command barcodes are included below. Default = 3 (High)
Illumination Off
Illumination Brightness Low
Illumination Brightness Medium
* Illumination Brightness High
