JADAK flexpoint™ HS-‐‑1M User’s Manual
Page 25
Vibration
The HS-1M has an optional internal Vibration motor function that can be used to indicate errors,
reads / no reads, etc. This can be very helpful in an environment where an audible beep would
be unwanted;; for instance in a patient ward at night in a hospital, where patients are sleeping.
Vibration Modes
The HS-1M can use its vibration engine to vibrate in different situations.
Use one of the codes below to set the vibration mode of the HS-1M. Default = Disabled.
* Don’t vibrate
Vibrate on good read
Vibrate on No Read
Vibrate on BEL (from host)
Vibrate on error
Vibration Pulse Count
Set the Vibration Pulse count (i.e. number of vibrations) between 1 and 5 pulses. Each
pulse’s duration will be determined by the vibration time setting (see next page).
Default = 1 pulse.
*1 Vibration pulse
2 Vibration pulses
