JADAK flexpoint™ HS-‐‑1M User’s Manual
Page 22
No Reads
Not every trigger event will result in a successful barcode read. When there is no barcode read
after a trigger release, the engine may return a no read signer in the form of the characters
NR
(which can be customized).
Scan one of the following codes to enable or disable the NR message.
Default = Disable No Read.
Enable No Read
* Disable No Read
No Read Message
The Aforementioned No Read signer (NR) can be changed if you require a custom message.
By using the command
NORDMSG
with ASCII text (up to a 100 characters) you can customize
this message. Several typical No Read Message menu command barcodes are included below.
Default = NR.
No Read Message
Setting Examples:
*
No Read Message: NR
No Read Message: No BC
*
No Read Message: NoRead
No Read Message: <NR>
