JADAK flexpoint™ HS-‐‑1M User’s Manual
Page 65
Chapter 8 – Product Specifications
HS-1M Series N Product Specifications
Parameter
Specification
Dimensions (Typical)
Height
Length
Width
Weight
1.3 inches (33.1 mm)
4.3 inches (109.2 mm)
2.1 inches (53.3 mm)
5.5 ounces (155g)
Aimer
Illumination LEDs
Aiming LEDs
Aiming Laser
617nm visible Red LEDs
528 nm visible Green LED
650 nm high-visibility Red Laser
CAUTION:
There are Series N versions that emit CDRH/IEC Class 2 laser
and IEC Class 1M light. Do not stare into beam.
Image
SVGA+, 844 x 640 pixels. Binary, TIFF or JPEG output
Skew Angle
± 65 degrees
Pitch Angle
± 45 degrees
Horizontal Velocity
Up to 230 inch (584 cm) per second with 100% UPC at 4 inch (10cm) distance
Scan Contrast
45% minimum for Matrix codes, 20% minimum reflectance
Voltage Requirements
4.75 – 5.25VDC at imager
Current Draw (Max)
@ 5VDC
Scanning
Standby
Inrush
Normal:
400mA
55mA
625mA
Power Supply
Noise Rejection:
Maximum 100mV peak to peak, 10 to 100 kHz
Temperature Ranges
Operating:
-13 °F to +122 °F ( -25 °C to + 50 °C)
Storage:
-13 °F to +158 °F ( -25 °C to + 70 °C)
Humidity
0 to 95% non-condensing, at 122°F (50°C)
Mechanical Drop
Operational after 50 drops from 6 feet (1.8 m) to concrete
ESD Sensitivity
± 8kV Air, ± 4kV contact discharge to any external surface
Agency Compliance
FCC Class B, CE EMC Class B, CE Low Voltage Directive,
IEC60825-1 LED Safety: Class 1, ENG60950
MTBF
Per MIL-HDBK-217F Ground Benign exceeds 85,000 hours
