JADAK flexpoint™ HS-‐‑1M User’s Manual
Page 15
Connecting the HS-1M with USB Port
Note:
These instructions are for use with the USB (JADAK CBL-0080) cable.
1.
If you are using USB Serial COM Port Emulation interface, you must first load the driver
for that interface onto your computer. The driver is available from your JADAK technical
support contact.
No driver is required when using the USB HID Keyboard interface.
2.
Turn off power to the terminal/computer.
3.
Connect the appropriate interface cable to the HS-1M hand scanner.
Note:
For the HS-1M to work properly, you must have the correct cable for your type
of
terminal/computer.
4.
Plug the USB-A connector into a free USB port on your computer.
5.
Once the HS-1M has been fully connected, power up the computer.
