JADAK flexpoint™ HS-‐‑1M User’s Manual
Page 55
MSI
MSI Defaults
Set all MSI settings to their default configuration with this command.
MSI On/Off
Scan one of the codes below to enable or disable MSI. Default = Disabled.
Enable
* Disable
MSI Minimum and Maximum Length
Use the following commands in combination with numerical values to set the minimum
and maximum length for allowed MSI barcodes.
Default minimum length = 4. Default maximum length = 48.
The minimum and maximum length for this symbology can be set either by sending the
serial command shown under the barcodes below with a value between 4 and 48, or by
scanning one of the barcodes below and then set the length by scanning the digit codes
and the SAVE barcode in
Appendix B
.
Please contact JADAK if assistance is needed.
MSI Minimum length
MSI Maximum length
