JADAK flexpoint™ HS-‐‑1M User’s Manual
Page 33
Prefixes
The Prefix character(s) is/are user-definable data characters that can be sent before the scanned
data. To enable or disable prefixes, scan the appropriate code below. Default = disabled.
Enable
* Disable
To set all prefix parameters to their default values, use the following code:
Prefix Block String
Use the command
PREBLOK
in combination with two (or more) hexadecimal digits to define a
specific ASCII character as Prefix or by scanning the barcode below and then set the ASCII
character by scanning the digit codes and the SAVE barcode in
Appendix B
.
Please contact JADAK if assistance is needed.
Look at the ASCII conversion chart to see what hex digits convert to specific ASCII characters.
For instance, if all the scanned barcodes need to have an “A” added to them in front of the data
string, enable Prefixes and send the command
PREBLOK 41
.
It’s also possible to program multiple prefixes like
PREBLOK 4229
;; this will add “B)” to a code.
Default Prefix Block= Carriage Return (hex: 0D).
Prefix Clear
To clear all prefixes, use the following code:
