![background image](http://html1.mh-extra.com/html/jacto/condor-b-12/condor-b-12_operators-manual_3186295029.webp)
29
OPERATION AND ADJUSTMENTS
OPERATING THE MASTERFLOW CONTROL VALVE
To calibrate the working pressure, proceed as follows:
01 - Run the tractor PTO and gradually accelerate until reaching 540 rpm.
02 -Set the relief lever to the
P
(pressure) position (fig.
A
).
03 - To increase the pressure, turn the knob clockwise (fig.
B
).
04 - To decrease the pressure, turn the knob counterclockwise (fig.
C
).
C
B
A
P
PRESSURE REGULATOR
MASTERLOW CONTROL VALVE
(CONDOR BX-12/75 MF / PJ-600 BX-10 MF)
This pressure regulator provides great sensitiviness and precision to the calibrations.
It has two basic functional characteristics in relation to the conventional control valves.
1. FLOW RATE PROPORTIONAL TO TRAVEL
The spray volume per area sprayed remains constant even if the tractor speed fluctuates
in a same gear.
2. SAME PRESSURE ALONG THE WHOLE BOOM REGARDLESS OF THE NUMBER OF
SECTIONS IN USE
A systems allows to calibrate the return of each boom section, thus keeping the same pressure
in all sections, regardless of the number of open or closed sections.
MASTERFLOW
CONTROL
VALVE
(1)
knob
pressure
gauge valve
pressure
gauge
ATTENTION
In order to assure long life to
the pressure gauge, after
regulating the sprayer, close
the lever (1), thus releasing
pressure, and close the
pressure gauge valve.
Summary of Contents for CONDOR B-12
Page 2: ......