background image

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

Copyright 2007, Graco Inc. is registered to I.S. EN ISO 9001

312101E

Instructions - Parts List

RAZOR

®

 Gravity 

Feed Gun

A premier gun for the automotive refinish market.

This manual is available in the following 
languages.

Contents

Models  . . . . . . . . . . . . . . . . . . . . . . . 2

Warnings  . . . . . . . . . . . . . . . . . . . . . 3

Setup  . . . . . . . . . . . . . . . . . . . . . . . . 4

Operation   . . . . . . . . . . . . . . . . . . . . 4

Maintenance  . . . . . . . . . . . . . . . . . . 5

Repair   . . . . . . . . . . . . . . . . . . . . . . . 6

Troubleshooting  . . . . . . . . . . . . . . . 7

Technical Data   . . . . . . . . . . . . . . . . 8

Accessories   . . . . . . . . . . . . . . . . . . 9

Parts   . . . . . . . . . . . . . . . . . . . . . . . 10

Graco Standard Warranty   . . . . . . 12

Graco Information   . . . . . . . . . . . . 12

Important Safety Instructions

Read all warnings and instructions in this manual.
Save these instructions.

Includes LVLP, HVLP, Compliant, and Conventional Series.

See page 2 for List of Models and maximum working pressures.
See page 10 for Parts.

English

312101

Spanish

312102

French

312103

German

312104

Italian

312105

TI8206

II 2 G

Summary of Contents for RAZOR 288561













Reviews: