![background image](http://html1.mh-extra.com/html/jacto/condor-b-12/condor-b-12_operators-manual_3186295019.webp)
19
MAIN COMPONENTS OF SPRAYER
FILLING WITH FILLING DEVICE (MODEL EJ-250)
Put 50 liters of water into the tank.
Remove the plastic cap of the primary valve (2) and set the lever to the filling position.
Connect the filling device hose (1) to the primary valve (2).
Place the filling device (3) in the water source and the end of its hose in the tank filling opening.
Run the PTO at 540 rpm.
After filling, set the primary valve (2) back to the working position and install again the plastic cap.
ATTENTION
THE SPRAYER FILLING OPERATION MUST BE MADE IN PLACES
APPROPRIATE FOR THIS PURPOSE, OR BY MEANS OF APPROPRIATE
VEHICLES (TRUCKS, TRAILERS, ETC.).
NEVER COLLECT WATER FROM RIVERS, LAKES, DAMS, STREAMS, ETC.
BY USING THE RETURN SYSTEM OF SPRAYERS.
control valve
primary valve (2)
tank
plastic cap
filling device
hose (1)
filling
device (3)
filling
position
working
position
clear water
tank
PROTECT THE ENVIRONMENT
AND ASSURE A HEALTHY LIFE.
Summary of Contents for CONDOR B-12
Page 2: ......