31
OPERATION AND ADJUSTMENTS
The chemicals are packaged in appropriate containers for each type of product.
After emptying the containers, they must be discarded in a safety way, in order not to poison
the man and the environment.
It is very important , before any discard of empty containers, to remove the residues of the
product that are sticked inside it and make it useless by piercing it.
Metal, plastic and glass containers must be rinsed for decontamination.
To facilitate this important operation , Jacto has installed on its trailed sprayers a suitable
device that rinses internally the containers with pressurized water, eliminating most of the
residues.
CHEMICAL CONTAINER RINSE
PROCEDURES
- Fill the chemical tank up to approximately
50% of its capacity.
- Pour the chemical into the tank.
- Engage the tractor PTO.
NOTE: The relief lever of the chemical control
must be set to allow the chemical return to the
tank (off) and the suction filter valve must be with
the arrow turned to the main tank.
ATTENTION: USE THE RECOMMENDED
PROTECTIVE CLOTHING FOR THIS OPERATION.
chemical control
open
closed
relief lever
sprinkler
stainer
valve directional
fixer valve
seals
Summary of Contents for CONDOR B-12
Page 2: ......
