background image

43

MAINTENANCE

- Daily, after finishing the spray application, put clear water in the tank,  remove the nozzles and run
the sprayer till empty.
- Clean and reinstall the nozzles and strainers.
- Clean the main filter.
- Wash the outside and inside of the sprayer.

This procedure will avoid future problems caused by filter, nozzle and tube obstructions, and

prolong the sprayer useful life.

GUIDELINES

MAIN FILTER

The frequency of filter cleaning depends on

the quality of water and type of chemicals used.

Clean the filter whenever filling the tank or

necessary.

FVS 100

valve

ring

filtering

element

filter cap

PRESSURE REGULATOR

Disassemble the pressure regulator every 100 working hours.
Check for wear on the valve and valve seat. Replace the parts if necessary.

ATTENTION

NEVER WASH SPRAYERS OR INDIVIDUAL PROTECTIVE EQUIPMENT IN OR

CLOSE TO RIVERS, LAKES, STREAMS, BROOKS, DAMS, ETC.

valve and valve

seat

valve seat

valve

spring

MAINTENANCE OF COMPONENTS

- Take off and wash all the individual protective equipment.
- Wash the working clothes separately from other clothing.
- Take a shower with plenty of water and soap and put on clean clothes.

MASTERFLOW CONTROL VALVE

(CONDOR BX-12/75 MF / PJ-600 BX-10 MF)

VAR CONTROL VALVE

Summary of Contents for CONDOR B-12























































Reviews: